Datakom DKG-307 Bedienungsanleitung PDF herunterladen (Seite 36)

DKG-307 User Manual V-42 (24.05.2013)

- 36 -

PGM

Parameter Definition

Unit

Fact.Set

Description

P_043

Genset Contactor

Timer

sec

This is the period after the mains contactor has

been deactivated and before the generator

contactor has been activated.

P_044

Mains Contactor

Timer

sec

This is the period after the generator contactor has

been deactivated and before the mains contactor

has been activated.

P_045

Stop Solenoid Timer

sec

This is the maximum time duration for the engine

to stop. During this period the STOP relay output

is energized (if assigned by Relay Definitions). If

the genset has not stopped after this period, a

FAIL TO STOP warning occurs.

P_046

Number of Starts

This is the maximum number of start attempts.

P_047

Mains Phase Order

Enable

0: mains phase order checking disabled

1: if mains phase order is faulty, then a warning is

given and mains contactor deenergized.

P_048

Genset Phase Order

Loaddump

0: genset phase order checking disabled

1: if genset phase order is faulty, then a loaddump

is generated and the genset stops after cooldown.

P_049

RPM from genset

frequency

This parameter is used in the conversion of the

genset frequency to engine rpm.

0: read rpm from the optional MPU input

1: convert frequency to rpm (using crank teeth

count)

P_050

Crank Teeth Count

This is the number of pulses generated by the

magnetic pickup sensing unit in one turn of the

flywheel.

This parameter is also used in the conversion of

the genset frequency to engine rpm. The

frequency in Hz is multiplied with this parameter

during conversion to rpm.

P_051

Low rpm Shutdown

rpm

If the engine speed goes under this limit, a GENSET

LOW SPEED alarm is generated and the engine

stops.

P_052

Low rpm Warning

rpm

If the engine speed goes under this limit, a GENSET

LOW SPEED warning is generated.

P_053

High rpm Warning

rpm

If the engine speed goes over this limit, a GENSET

HIGH SPEED warning is generated.

P_054

High rpm Shutdown

rpm

If the engine speed goes over this limit, a GENSET

HIGH SPEED alarm is generated and the engine

stops.

P_055

Alarm Relay Timer

sec

This is the period during which the ALARM relay

is active. If the period is set to 0, this will mean

that the period is unlimited.

P_056

Intermittent Alarm

Relay

0: continuous

1: intermittent (turns on and off every second)

P_057

Service Engine Hours

hour

The SERVICE REQUEST led indicator will turn on

after this quantity of engine hours from the last

service. If the period is set to ‘0’ no SERVICE

REQUEST will be generated depending on engine

hours.

P_058

Service Period

month

The SERVICE REQUEST led indicator will turn on

after this amount of time from the last service. If

the period is set to ‘0’ no SERVICE REQUEST will

be indicated depending on time.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Datakom DKG-307 Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Datakom DKG-307